Mon-Sun: 10am-7pm
A: the energy and therapeutic effect of picosecond mainly depend on the band you choose, the therapeutic device and the final number of hits. Normally, band 755 is the most commonly used, while darker skin can choose band 1064 to reduce the risk of color subsidence. Different therapeutic tools determine that the energy of each laser should be chosen according to your own skin quality. The more you use, the better.
Q: freckle must use blasting mode, otherwise there is no effect?
A: the energy of blasting mode is higher, the penetration level is deeper, although the explosive power of melanin is better, but the skin damage is bigger and the recovery period is longer, and some even break the skin and bleed longer, in this case it is more tolerant; it is easy to cause pigmentation after inflammation; commonly known as anti-black.
Q: can chloasma do picoseconds?
A: chloasma belongs to skin type, epidermis type, mixed epidermis type and mixed type chloasma can all do picosecond, but pay great attention to the setting of energy and parameters and make sure that the skin is dry and inflamed.
Q: how many times do you have to play in picoseconds?
A: there is no direct relationship between the number of shots hit in the whole face and the final number of shots. Fast full-face scan three times may only hit 1000 shots and slow full-face scan can reach 5000 shots.
Q: how much energy does it take to remove freckle in picosecond?
A: most of the spots are dry epidermis and do not need strong energy to achieve very good freckle effect. At the same time, it can also avoid excessive damage to the skin caused by laser energy.
Q: after making picoseconds, you can’t eat soy sauce, coffee, colored food?
A: coffee is not recommended to drink at night. Because caffeine can make it impossible to sleep normally, which leads to melanin secreted by the pituitary gland to increase melanin. If you can go to bed on time, it doesn’t matter if you have enough rest and drink coffee. As for soy sauce, there is no scientific research to prove that it increases melanin.
Q: what do you need to pay attention to when removing chloasma?
A: it is best to start azelaic acid, An alcohol, hydroquinone or tranexamic acid products 4-6 weeks before treatment. Skin care oral vitamin C or tranexamic acid to inhibit melanin activity. In addition to picosecond, it can also be combined with fruit acid skin replacement, water light needle, gold microneedle and other items.
Q: how many days will it take to take care of the skin after doing it?
A: the normal operation should be non-invasive, no broken skin, no bleeding, no wound and wait for the skin to be stable 24 hours later. Within 4 hours if the skin feels dry, it can be applied thinly.
Q: how many days can I put on makeup after I’ve done it?
A: it’s best to wait until the scab has all come off before you start applying makeup. Because some irritating ingredients in cosmetics and makeup removers may irritate the skin after operation.
Q: why is it not suitable to wear makeup immediately after picoseconds?
A: because when removing makeup, if you rub your face vigorously, it may cause scab to fall off prematurely.
Q: don’t eat photosensitive food after picosecond?
A: photosensitive food should be reduced during the day, such as lemon, celery, coriander and so on. Because there is also scientific evidence that it is easy to affect skin pigments.
Q: can picosecond make skin better?
A: picosecond itself can stimulate collagen regeneration and repair damaged skin cells can make skin better.
Q: apply the mask twice a day after picosecond?
A: no, one mask a day, 20 minutes or so, excessive application of the mask for a week will make the stratum corneum dry and edema for a long time, induce inflammation, that is, the medical so-called hydration dermatitis.
Q: except for the mask. Is there any other way to replenish water?
A: in fact, facial mask is not the only way to replenish water. Drinking plenty of water, using correct skin care products to repair skin barrier, enhancing skin’s water-locking ability, turning on indoor heater, avoiding cold and hot air blowing directly from air conditioners, and healthy work and rest are all good ways to replenish water and keep warm.
Q: why do other people use freckle only once, but I need it many times?
A: according to the type of spot, the depth of the spot, the tolerance of the skin itself, postoperative maintenance of personal physique will affect the final treatment effect. Freckles require less treatment than dry chloasma.
Q: shouldn’t I pay so much for treatment with high-energy picoseconds?
A: each kind of spot is actually different. Some spots look very light, but they are actually deep in the dry skin, and you need a lot of treatment. Some skin even if hit very high energy also can quickly turn red will not be anti-black, some people hit a dry serious redness and swelling treatment times are not the same. Therefore, we must believe in the judgment of professional laser teachers, do not taste good desire, think that with the highest energy effect will be the best.
Q: will picoseconds make skin thinner and more sensitive?
A: as long as you are in a formal institution, find professionals to use genuine equipment, carry out normal frequency of treatment, and do good postoperative care, picoseconds will not make skin sensitive.
Q: what should you pay attention to after sensitive musculosecond surgery?
A: if your skin belongs to a sensitive constitution, and the picosecond laser energy chosen by the laser teacher is too high and too frequent, it is easy to make your skin more sensitive if you do not pay attention to sunscreen or use irritating skin care products after operation. Therefore, we must carefully choose the organization and strictly do a good job of repair.
Q: how long can the picosecond effect last?
A: the maintenance of the picosecond effect depends very much on personal daily maintenance. If picosecond freckle, still do not pay attention to sunscreen, the probability of re-growing spots will be greatly increased. In addition, female hormonal changes, such as pregnancy, menopause long-term oral contraceptive, are easy to induce chloasma.
Q: how long is the interval between picosecond and other medical items?
A: the interval between picosecond and water light needle, photon rejuvenation, lattice laser and gold microneedle should not be less than 4 weeks. Wait for the skin to return to health before doing such as overheated Maggie, ultrasonic knife, or line carving, wait at least 6 months. If you have done hyaluronic acid filling, wait at least three months before making picoseconds. A thin face injection can be given after picosecond surgery, and hyaluronic acid filling can be performed two weeks later.
/
/ mdashability /
picosecond is a kind of laser, which emits a stable laser with the best wavelength of 755nm for the treatment of pigment problems, so that the light and heat energy can reach the deep layer of the skin quickly, accurately and ruthlessly, and smash melanin into & ldquo; powder & rdquo; small particles, making it easier for the human body to excret through metabolism. Picosecond is the natural enemy of skin problems such as epidermal freckles, coffee spots, senile spots, sunburn, basal pigmentation and so on. Picosure, a special instrument for / mdashability / mdash / mdash.mdash
picosecond, has & ldquo; flat scan & rdquo;, & ldquo; Honeycomb & rdquo;, & ldquo; blasting & rdquo;3 modes, in which & ldquo; Honeycomb Mode & rdquo; adopts honeycomb lens technology, which can emit high energy like a shower, effectively heat collagen and stimulate collagen regeneration, and the skin will be more delicate and shiny after finishing picosecond.
1 before operation: remove makeup and wash your face, and check the bottom brown spots with VISIA skin detector. Apply anesthetic for about 40 minutes. compared with ordinary laser, picosecond pulse width is shorter, peak energy is higher, damage ability is stronger, and thermal damage is smaller, dark skin people have a lower risk of color sink, black and yellow skin beauty should be highlighted, picosecond is suitable for us yellow people, skin inflammation baby do not do.
#59#
2 operation: Focus honeycomb probe with 6nm spot size hand equipment, the whole face swept evenly, the spots focus on strengthening, until the spots produce frost white reaction, the whole face slightly flushed, a total of 6556 rounds. After
3 operation: immediately ice compress for 15-20 minutes to cool down, and special physical sunscreen was used after operation. So
if you are the same, independently distributed, beige, grain-sized freckles and sunspots, don’t worry, picoseconds can easily help you. The whole process of
#60#
picosecond laser:
#57#
#58#